EasyManuals Logo
Home>Logik>TV DVD Combo>L22DVDW10

Logik L22DVDW10 User Manual

Logik L22DVDW10
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
GB-18
GB
Initial Setup
Connecting the Aerial
Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to
the RF (75Ω) socket on the right rear side of your TV.
Turning the TV On for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. Switch on the POWER ON/OFF switch at the side of the TV.
At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
3. In standby mode, press the
/ I button on the top panel of the
TV or the
button on the remote control to turn the TV on. The
red LED indicator will turn blue.
OR
CARD FACE FRONT
RF coaxial cable
(not included)
OFFON
To the mains socket
4. The first time you turn the TV on, it will go straight into the
FIRST TIME INSTALLATION menu. (If you have already installed
the TV using the Quick Start Guide, please go to the next step
Selecting the Input Source on the next page.)
5. Press the
buttons to navigate the menu and change the settings.
Country Select the country where you will operate the TV.
Delete Program Select to delete the tuned channels in the TV.
Search Program Select to search automatically for analogue and
digital TV programmes.
6. Select YES on the screen and then press the OK button on the
remote control to start the First Time Installation.
Select NO on the screen to cancel the First Time Installation.
A First Time Installation reminder will appear the next time you
turn on the TV.
Do not connect the TV to the mains
supply until you have completed all the
connections.
Always disconnect the TV from the mains socket
when not in use for a long period of time.
The
/ I button on the top panel of the TV or the
button on the remote control is only used for
switching the TV into standby, it does not disconnect
the TV from the mains power. To completely
disconnect the mains power, please remove the
mains plug from the mains socket or switch off the
POWER ON/OFF switch.
Initial Setup
L22DVDW10_B20_IB_New_110110_Annie.indd 18 11年1月10日 下午5:17

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L22DVDW10 and is the answer not in the manual?

Logik L22DVDW10 Specifications

General IconGeneral
BrandLogik
ModelL22DVDW10
CategoryTV DVD Combo
LanguageEnglish

Related product manuals