GB-26
GB
Using the Features
4. Select YES on the screen and then press the OK button on the remote
control to start the First Time Installation.
Select NO on the screen to cancel the First Time Installation.
A First Time Installation reminder will appear the next time you turn on the
TV.
3. Press the
buttons to navigate the menu and change the settings.
Country Select the country where you will operate the TV.
Delete Program Select to delete the tuned channels in the TV.
Search Program Select to search automatically for analogue and
digital TV programmes.
Installation
Allows you to set up your TV if you have not previously done so or if you have moved house.
1. Press the MENU button and then use the
buttons to select the
FUNCTION menu and then press the
button.
2. Press the
buttons to select INSTALLATION and then press the OK
button or the
button.
Reset
Restores all settings to factory defaults.
1. Press the MENU button and then use the
buttons to select the
FUNCTION menu and then press the
button.
2. Press the
buttons to select RESET and then press the OK button or the
button.
3. Press the
buttons to select YES on the screen. All settings will be reset
to factory defaults and the FUNCTION menu will disappear.
If you stop the tuning before it has finished, the TV will report it
as a no signal error. This is normal because all previous channel
memory has been cleared before tuning is carried out.
L22DVDW10_B20_IB_New_110110_Annie.indd 26 11年1月10日 下午5:17
To Next Page
Loading...
Need help?
General
