28
GB
Using the Features
2. Press the buttons to select the following sound options and then
press the OK button.
Customising the Sound Setting
Allows you to select an audio-enhancement technique.
1. Press the MENU button and then press the
buttons to select the
SOUND menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Sound Mo d e
Treble
Auto Vol u me
SRS TruS u rround H D
SPDIF Mo d e
AD Switc h
Bass
Balance
Standard
50
On
Off
Auto
Off
50
0
Sound Mode Press the the buttons to select an audio-enhancement technique: Standard /
Music / Movie / Sports / Personal and then press the OK button to confirm.
Alternative
You may press the S.MODE button to select the sound mode directly.
Treble Press the
buttons to control the relative intensity of higher pitched sounds. (for Personal mode)
Bass Press the
buttons to control the relative intensity of lower-pitched sounds. (for Personal mode)
Balance Press the
buttons to adjust the relative volume of the speakers in a multiple speaker system.
Auto Volume Press the
buttons to turn on / off the auto volume. Select On to automatically control the volume.
(e.g. advertisements tend to be louder than the programmes)
SRS
SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS
Labs that provides an enhanced listening experience unlike any other technology that has been offered
for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry
leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to
6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary
algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better
intelligibility of vocals, and definition control for maximum high-frequency clarity.
Press the
buttons to select On / Off.
Alternative
You may press the button to turn on / off the SRS function directly.
SPDIF Mode Press the
buttons to select the digital audio output mode.
AD Switch
(For DTV mode)
Audio Description is an auxiliary audio function that provides an additional audio track for visually
challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is
sent along with the main audio from the broadcaster.
• Set to “Off” for normal broadcasting sound coming out from speakers.
• Set to “On” to activate the description sound track if available. The availability of Audio Description
sound track is indicated by the visually impaired icon "V.I." in the information banner.
Alternative
You may press the AD button to turn on / off the audio description.
3. Press the EXIT button to exit the menu.
Sound Mode
Standard
Music
Movie
Sports
Personal
BACK MENU
EXIT
L24DVDB11_IB_110429.indd 28 29/04/2011 5:10 PM
To Next Page
Loading...
Need help?
General
