55
GB
Using the DVD Features
Info (for DVD / CD / Multimedia discs)
Press the button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information.
For DVD discs, press the
button once to display the first page as shown below:
PROG (for DVD / CD / Multimedia discs)
(Allows you to set the title and charpter you want to skip to play)
1. Press the PROG button to display the first page as shown below.
2. Press the 0-9 buttons to set T (title number).
3. Then press the
button and press the 0-9 buttons to set C (charpter
number).
4. Press the
button to select PLAY or CLEAR, press the OK button confrim.
5. Press the PROG button to exit the program menu.
Angle (for DVD)
(Allows you to switch the viewing angle of video)
Press the ANGLE button repeatly to select the different angle you want ( Only for the dics has this characture).
Step (for DVD)
(Allows you to watch program in datails of every frame)
Press the STEP button repeatly to watch every frame.
Press the
button to exit the step mode.
Zoom (for DVD)
(Allows you to select the video size of programme stream)
Press the ZOOM button to select the size you want.
Goto (for DVD)
This function allows you to play your favorite Title / Chapter / Time. Press the GOTO button to activate the on screen scroll-down
menu for selecting. Input your Title / Chapter / Time by pressing the 0-9 buttons or input the playback time. After editing, press
the OK button to start. If the input is invalid, it will not function.
Press the
button again to display the second page as shown below:
Disc Type -/- (Current / Full) -/- (Current / Full) Elapsed disc time
Title Chapter
Audio Language Subtitle -/- (Current / Full) or OFF Angle ON / OFF
-/- (Current / Full) or OFF Audio Type
L24DVDB11_IB_110429.indd 55 29/04/2011 5:10 PM
To Next Page
Loading...
Need help?
General
