38
GB
Using the Features
Customising the LOCK Setting
To access the LOCK menu, you must enter the password. Enter the default password “0000” for first time use. To change the
password, please refer to page 39 "Set Password”.
Lock System
The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable
programmes.
The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered
when you access Auto Tuning / Manual Tuning / Restore Factory Default.
1. Press the MENU button and then press the
buttons to select the
LOCK menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select Lock System and then press the OK
button.
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
4. Press the buttons to select Lock System and then the OK buttons to
select On / Off.
If the Lock System is set to On, a valid password must be entered when you
access Auto Tuning / Manual Tuning / Program Edit / First Time Installation /
Restore Factory Default.
5. Press the BACK button to return to the previous menu.
6. Press the EXIT button to exit the menu.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
Please enter password
The default password is “0000”.
If you change the password, be sure to remember the new
password! If you forget the new password, press the master
password“8899”.
L24DVDB11_IB_110429.indd 38 29/04/2011 5:10 PM
To Next Page
Loading...
Need help?
General
