12
1. Press the MEMORY button, The “MEMORY“ and “P01“ indicator will flash on the
display.
• For MP3/USB tracks, press the MEMORY button repeatedly to select an album,
then press the FOLDER UP or FOLDER DN./RESTART buttons to select a folder
you want.
2. Select desired track by using the SKIP+ or SKIP
-
button.
3. Press the MEMORY button again to confirm desired track into the programme
memory.
Programme
• Up to 20 tracks (in CD mode) or 99 tracks (in MP3 or USB
mode) can be programmed for disc play in any order.
• Be sure to press the STOP button before use.
When the memory is full, “MEMORY” and “FUL”
will flash on the display.
4. Repeat steps 2 and 3 to enter additional tracks into the programme memory.
5. When all the desired tracks have been programmed, press the PLAY/PAUSE
button to play the disc in the order you have programmed the tracks. The
“MEMORY” indicator will flash.
6. Press the STOP button to terminate programmed play and the “MEMORY”
indicator will disappear.
To Next Page
Loading...
Need help?
General