EasyManua.ls Logo

Logik LCDBM12

Logik LCDBM12
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following
table contains various tips.
Problem Cause / Solution
No power supply. Check that the mains cable is correctly connected to
the mains socket and the unit.
No sound from the speakers. Check if the VOLUME control is set to minimum.
The system may be in pause mode. Press the PLAY/
PAUSE
button to resume normal playback.
Poor FM reception. Make sure FM aerial wire is fully extended.
Electrical interference in your home can cause
poor reception. Move the unit away from them
(especially those with motors and transformers).
The CD compartment
cannot be closed.
The disc is not correctly positioned in its
compartment.
CD does not play. The disc is dirty.
The disc is placed upside down.
The PAUSE function is on. Press the PLAY/PAUSE
button to resume playback.
Audio distortions or no
audio during CD playback.
The surface of the disc is dirty or scratched.
The Portable CD Stereo does
not function properly while
using battery.
Batteries are dead. Replace with new batteries.
The polarities of the batteries are inserted in
reverse. Insert them properly.
File from media storage
device does not play.
Check the file format.
This product only support MP3 format.
If any anomaly occurs, switch the FUNCTION selector to the OFF position, and then
switch it back to CD/MP3/USB or FM positions again.
If the unit is not used for 30 minutes or more, it will automatically enter STANDBY
mode. Press the FOLDER DN . / RESTART button to resume use.