EasyManuals Logo

Logik LCDBM12 User Manual

Logik LCDBM12
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Safety Warnings
Ventilation
To prevent the risk of electric shock or re hazard
due to overheating, ensure that curtains and
other materials do not obstruct the ventilation
vents.
Do not install or place this unit in a bookcase,
built-in cabinet or in another conned space.
Ensure the unit is well ventilated.
Safety
Always disconnect the unit from the mains
supply before connecting / disconnecting other
devices or moving the unit.
Unplug the unit from the mains socket during a
lightning storm.
In the interests of safety and to avoid
unnecessary energy consumption, never leave
the unit switched on while unattended for
long periods of time, e.g. overnight, while on
holiday or while out of the house. Switch it o
and disconnect the mains plug from the mains
socket.
Mains Cable
Make sure the unit or unit stand is not resting
on top of the mains cable, as the weight of the
unit may damage the mains cable and create a
safety hazard.
If the mains cable is damaged it must be
replaced by the manufacturer, its service agent,
or similarly qualied persons in order to avoid
a hazard.
Interference
Do not place the unit on or near appliances
which may cause electromagnetic interference.
If you do, it may adversely aect the working of
the unit, and cause a distorted sound.
Earphones
Listening to loud sounds for prolonged
periods of time may permanently damage
your hearing.
Before putting on earphones, turn the
volume down then put the earphones on and
slowly increase the volume until you reach a
comfortable listening level.
Read all the instructions carefully before using
the unit and keep them for future reference.
Retain the manual. If you pass the unit onto a
third party make sure to include this manual.
Check that the voltage marked on the rating
label matches your mains voltage.
Damage
Please inspect the unit for damage after
unpacking.
Do not continue to operate the unit if you are
in any doubt about it working normally, or if it
is damaged in any way - switch o, unplug from
the mains socket and consult your dealer.
Location of Unit
The unit must be placed on a at stable surface
and not subjected to vibrations.
Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
The mains socket must be located near the unit
and should be easily accessible.
Temperature
Avoid extreme degrees of temperature, either
hot or cold. Place the unit well away from heat
sources such as radiators or gas / electric res.
Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
Never place any type of candle or naked ame
on the top of or near the unit.
Moisture
To reduce the risk of re, electric shock or
product damage, do not expose this unit to rain,
moisture, dripping or splashing. No objects lled
with liquids, such as vases, should be placed on
the unit.
If you spill any liquid into the unit, it can cause
serious damage. Switch it o at the mains
immediately. Withdraw the mains plug and
consult your dealer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LCDBM12 and is the answer not in the manual?

Logik LCDBM12 Specifications

General IconGeneral
BrandLogik
ModelLCDBM12
CategoryStereo System
LanguageEnglish