GB-5
Adjusting the telescopic hood
The telescopic chimney ue can be adjusted in height to t your ceiling once fully attached to the wall.
Re-Circulation using Carbon lters
Two carbon lters (not supplied) can also be added to your Cooker Hood, when air is to be re-circulated instead of
external ducting. Attach to either side of the motor. Please see Partmaster Direct details on the back cover to order
them - for UK only. (2 carbon lters required)
Re-circulation using carbn lters
Carbon Filter
Align the rib in lter with the slot in fan guard.
Slide the lter in position.
The lter is locked.
Press the knob to release the lter.
Take out the lter.
In Use
Control panel
0 = Switches the Cooker Hood o.
1 = Low speed. Is suitable when low levels of steam are created whilst cooking.
2 = Medium speed.
3 = High speed. Is suitable when high levels of steam are created whilst cooking.
= Switches the overhead light on.
The Cooker Hood should be left on for at least 15 minutes after cooking has nished to ensure ecient
ltering of the air.
To Next Page
Loading...
