GB-7
Maintenance and Troubleshooting
Changing the internal light
Allow the Cooker hood to cool for at least 30 minutes after use before changing the light bulb.
1. Before carrying out the bulb replacement always switch o and disconnect the electrical supply.
2. Remove the removable lters by holding down the buttons on each panel and lifting towards you.
They can then be taken out of the Cooker hood.
3. Remove the old bulb by unscrewing it in an anti-clockwise direction.
4. Replace with a new bulb (maximum 40w) by screwing it in a clockwise direction.
Make sure that it is secure in the bulb holder (your cooker hood is tted with 2x 40w bulbs).
5. Replace the lters.
The Cooker hood is not working
• Check it is plugged in and switched on.
• Check that the fuse in the plug has not blown.
• Plug in another appliance, such as a lamp, to see if the socket is working.
Servicing
Only an authorised, qualied technician should perform repairs and maintenance of the appliance.
To Next Page
Loading...
