INSTALLATION
10
GB
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage to
the back of the unit.
4. The condensation strip must be tted
to the underside of the worktop above
your dishwasher to protect it against any
moisture. Its purpose is to protect your
worktop’s underside from steam rising from
the dishwasher.
Remove the backing paper from the
condensation strip.
Leave some space
Stick the Condensation
Strip under the worktop,
where you want to install
the dishwasher.
5. Stick the condensation strip to the
underside of the worktop.
6. For Wooden Worktop Only
Place the Installation Hook to secure the
unit as shown.
Failure to attach the condensation
strip could result in damage to the
underside of your worktop!
Ensure the surface is clean prior to
sticking the condensation strip to the
underside of the worktop.
LDW60W_T20N_IB_5L_RC_Final210906.indb 10LDW60W_T20N_IB_5L_RC_Final210906.indb 10 6/9/2021 3:04 PM6/9/2021 3:04 PM
To Next Page
Loading...
