EasyManuals Logo

Logik LDW60T20N User Manual

Logik LDW60T20N
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
37
GB
Hints and Tips
Technical Problems
General Problems
Problem Possible Causes Remedy
The dishwasher does not start. The door is not properly closed. Close the door firmly.
The unit is not connected to the
mains socket.
Connect the mains plug to the mains
socket.
The unit is not switched on.
Press the
On/Off button and select a
programme.
Error code “E1” displayed.
Longer inlet time.
Faucet is not open.
Water intake is restricted.
Water pressure is too low.
Check and make sure the faucets are
open and functioning properly.
If error still occurs, call a qualified
technician.
Error code “E3” displayed.
Required temperature not
reached.
Malfunction of heating element. Shut off the water tap, disconnect from
the mains and contact a qualified service
agent.
Error code “E4” displayed.
Overflow.
Some element of dishwasher leaks. Shut off the water tap, disconnect from
the mains and contact a qualified service
agent.
Error code “E8” displayed. Failure of orientation of
distributary valve.
Shut off the water tap, disconnect from
the mains and contact a qualified service
agent.
Error code “Ed” displayed. Communication anomaly. Shut off the water tap, disconnect from
the mains and contact a qualified service
agent.
The drain pump is not working
properly.
The anti-flooding system has
operated.
Disconnect from the mains socket.
Disconnect the water inlet.
Call a qualified technician.
Detergent residue is left in the
dispenser at the end of the
programme.
The detergent dispenser was still
damp when detergent was added.
Make sure the dispenser is dry before
adding detergent.
The detergent dispenser lid cannot
be closed properly.
Clogged detergent residue is
blocking the catch.
Clean the catch.
Knocking noise in the wash
cabinet.
A spray arm is knocking against an
item in a basket.
Interrupt the programme, and rearrange
the items which are obstructing the
spray arm. See the section Loading the
Dishwasher.
Smearing appears on glassware
and cutlery.
The rinse aid dosage is set too
high.
Adjust the rinse aid dosage to a lower
dosage.
Repairs should only be carried out by a service agent in strict accordance with current
local and national safety regulations. Unauthorised or incorrect repairs could cause
personal injury or damage to the unit.
Before calling for service, please refer to the section Hints and Tips to solve some
general problems by yourself.
LDW60W_T20N_IB_5L_RC_Final210906.indb 37LDW60W_T20N_IB_5L_RC_Final210906.indb 37 6/9/2021 3:04 PM6/9/2021 3:04 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LDW60T20N and is the answer not in the manual?

Logik LDW60T20N Specifications

General IconGeneral
TypeFreestanding
Capacity12 place settings
Energy RatingE
Energy efficiency ratingE
Drying efficiency ratingA
Noise Level49 dB
Wash programs6
Quick wash time30 minutes
Dimensions (H x W x D)845 x 598 x 600 mm
Height84.5 cm
Depth60 cm
ColourWhite
FeaturesHalf Load
Width598 mm

Related product manuals