22
GB
Adjusting Salt Consumption
Salt consumption must be adjusted to correspond to the water hardness level in your area. If you
don’t know how hard the water in your home is, please ask the company that supplies water in
your area.
It is recommended that adjustments should be made in accordance with the following chart.
Water Hardness
Selector
Position
Salt Consumption
(Gram/Cycle)
German ˚dh French ˚fh
British
˚Clarke
mmol/l
0-5 0-9 0-6 0-0.94 H1 0
6-11 10-20 7-14 1.0-2.0 H2 9
12-17 21-30 15-21 2.1-3.0 H3 12
18-22 31-40 22-28 3.1-4.0 H4 20
23-34 41-60 29-42 4.1-6.0 H5 30
35-55 61-98 43-69 6.1-9.8 H6 60
To optimise your dishwasher for the local water hardness, please follow the steps below and refer
to the above table.
1. Switch on the dishwasher.
2. Press and hold the P program button for 5 seconds until the salt rell warning indicator will
be on periodically.
3. Press the P program button repeatedly to adjust the water hardness level: H1 / H2 / H3 / H4 /
H5 / H6.
4. After adjusting the water hardness level, press the
button to save the setting.
1°dH (German degree) = 0,1783 mmol/L
1°fH (French degree) = 0,09991 mmol/L
1°Clark (British degree) = 0,1424 mmol/L
• Do not use everyday table salt or cooking salt as they contain insoluble substances
which could damage the dishwasher.
• Do not pour detergent into the salt container. This will damage the dishwasher.
LDW60W_T20N_IB_5L_RC_Final210906.indb 22LDW60W_T20N_IB_5L_RC_Final210906.indb 22 6/9/2021 3:04 PM6/9/2021 3:04 PM
To Next Page
Loading...
Need help?
General
