EasyManuals Logo

Logik LINDHOB10 User Manual

Logik LINDHOB10
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
Cleaning and Maintenance
What? How? Important!
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the glass)
1. Switch the power to the induction
hob off.
2. Apply an induction hob cleaner
while the glass is still warm (but not
hot!)
3. Rinse and wipe dry with a clean
cloth or paper towel.
• When the power to the induction hob
is switched off, there will be no ‘hot
surface indication but the cooking
zone may still be hot!
Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner
or scourer is suitable.
• Never leave cleaning residue on the
induction hob: the glass may become
stained.
Boilovers, melts, and
hot sugary spills on the
glass
Remove these immediately with a fish
slice, palette knife or razor blade scraper
suitable for ceramic glass induction hobs,
but beware of hot cooking zone surfaces:
1. Switch the power to the induction
hob off.
2. Hold the blade or utensil at a 30°
angle and scrape the soiling or spill
to a cool area of the induction hob.
3. Clean the soiling or spill up with a
dish cloth or paper towel.
4. Follow steps 2 to 3 for ‘Everyday
soiling on glass’ above.
• Remove stains left by melts and
sugary food or spillovers as soon as
possible. If left to cool on the glass,
they may be difficult to remove or
even permanently damage the glass
surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper is
razor-sharp. Use with extreme care and
always store safely and out of reach of
children.
Spillovers on the touch
controls
1. Switch the power to the induction
hob off.
2. Soak up the spill
3. Wipe the touch control area with a
clean damp sponge or cloth.
4. Wipe the area completely dry with a
paper towel.
• The induction hob may make an
available tone or turn itself off, and the
touch controls may not function while
there is liquid on them. Make sure you
wipe the touch control area dry before
turning the induction hob back on.
LINDHOB10_IB_final110415.indd 16 15/04/2011 2:16 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LINDHOB10 and is the answer not in the manual?

Logik LINDHOB10 Specifications

General IconGeneral
BrandLogik
ModelLINDHOB10
CategoryHob
LanguageEnglish

Related product manuals