17
Wash Setting
Standard Washing
1. Pull the door handle and put the laundry in the
drum. (Refer to Preparation to sort your laundry
before it goes into the drum.) Make sure no washing
gets caught in the door. Close the door.
2. Press the Power button and turn the Programme
Dial to select your wash programme.
3. Select other functions if desired.
4. Add detergent into the detergent drawer. The
quantity of detergent will depend on the amount
of laundry, the degree of soiling and the water
hardness. Use the amount of detergent suggested
on the packaging.
5. Press the Start / Pause button to start the washing.
6. The washing machine will sound when the wash
programme is completed.
Before First Use
Before washing your clothes for the rst time, run a full wash programme rst:
1. Connect the machine to the mains power supply and the water supply.
2. Put a small amount of detergent in the detergent drawer. Close the drawer.
3. Press the Power button.
4. Select a wash programme.
5. Press the Start / Pause button.
Removing Washing (Once programme is nished)
Linen
Rapid 45’
Jeans
• Open the washing machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.
If the door is locked and you switched the machine o and then on - or if there’s a power
cut - it will stay locked for 1 minute.
Door remains locked for 1 minute after wash stopped.
LIW714W20_IB_Final200729.indd 17LIW714W20_IB_Final200729.indd 17 29/7/2020 5:33 PM29/7/2020 5:33 PM
To Next Page
Loading...
Need help?
General
