11
3. Loosen the hinge pin, reverse it and put it
back to the hole, tighten into position. Take
down the gasket and change its position.
4. Remove the middle hinge. Lift the lower
door and place it on a padded surface to
prevent from being scratched.
5. Remove the screw and stop block from the
bottom of the lower door and move it to
the opposite side. Remove also the door
stopper and keep it for future use. For the
opposite side, use the door stopper for left
side. Screw tightly.
Door stopper has left and right
side. The door stopper packed as
an accessory is for the left side.
LNFD55W_X_T18_IB_RC_190410_grace.indd 11 10/4/2019 7:50 PM
To Next Page
Loading...
