Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overlled.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a sponge or cloth. Wipe completely dry before replacing the shelves, drawers and
salad bin. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant uid needs time
to settle.
Inserting the Door Rubber Block
Door rubber block functions as a cushion to
relieve impact when the door closes.
2 are already inserted in the inner lower
corners of upper doors and another 2 are
inserted in the inner upper corners of lower
doors. Make sure they are not removed.
If they are missing, use the 2 spare door
blocks in the accessory bag.
10
LSBS4DX18_IB_RC_190418_grace.indd 10 18/4/2019 1:46 PM
To Next Page
Loading...
Need help?
General
