Logik LSBS4DX18 User Manual

Operation
Connect the mains cable to the mains socket.
Ensure the buttons are unlocked by checking that the
icon is not displayed, if displayed, press
and hold LOCK 3’S until the
icon disappears.
Temperature Setting
Fridge temperature setting:
• Press FRIDGE repeatedly to adjust temperature of fridge compartment. If
“OFF” is selected, the fridge compartment will turn o.
• To conrm selected temperature, stop pressing any button until the
selected temperature is steadily displayed.
Freezer temperature setting:
• Press FREEZER repeatedly to adjust temperature of freezer compartment.
• To conrm selected temperature, stop pressing any button until the
selected temperature is steadily displayed.
The unit may not operate at the correct temperature if it is in a particularly
hot or a particularly cold room, or if you open the doors often.
To ensure that the unit is cool enough to suciently chill and freeze your
food, wait 24 hours before lling it with food.
If you are concerned that your unit is not being kept cold enough and wish to
check the temperature, you will need a special fridge/freezer thermometer.
These are available from most supermarkets and hardware shops. Place the
thermometer in the centre of either the fridge or freezer compartment and
leave overnight. The correct temperature for the fridge compartment should
be an average of 5°C. The correct temperature for the freezer compartment
should be -18°C or lower.
ECO Mode
When ECO mode is selected, the temperature of the appliance will be automatically adjusted
depending on the ambient temperature:
• if ambient temperature is ≤ 27°C, fridge temperature will be set to 5°C and freezer
temperature will be set to -18°C
• if ambient temperature is > 28°C but ≤ 34°C, fridge temperature will be set to 6°C and freezer
temperature will be set to -17°C
• if ambient temperature is > 35°C, fridge temperature will be set to 8°C and freezer
temperature will be set to -16°C
You cannot adjust the fridge/freezer temperature manually unless you exit ECO mode.
• Press MODE repeatedly to select ECO mode (
). To conrm selection, stop pressing any
button until the ECO icon is steadily displayed.
• To exit ECO mode, press MODE repeatedly to select other mode or the user’s setting mode
(no icon in display).
When no buttons are pressed after a few seconds, the unit will lock automatically. The
icon will be displayed.
12
LSBS4DX18_IB_RC_190418_grace.indd 12 18/4/2019 1:46 PM

Logik LSBS4DX18 Specifications

General

Brand	Logik
Model	LSBS4DX18
Category	Freezer
Language	English