What to do if both 3H and 6H lights are flashing on my Logik Dryer?
If both the 3H and 6H lights are flashing on your Logik Dryer, switch off the dryer by pressing the On/Off button and pull out the mains plug. After that call a qualified service agent for assistance.
Key safety precautions for using the tumble dryer.
Guidelines for safe dryer installation, including electrical and placement requirements.
Step-by-step instructions for correctly installing the tumble dryer.
Guidance on selecting an appropriate and safe location for the tumble dryer.
Procedures for safely moving and installing the dryer, including vent hose setup.
Instructions on how to adjust the levelling feet to ensure the dryer is stable.
Steps for safely connecting the dryer to the electrical power supply.
Identification of the main parts and features of the tumble dryer unit.
Guidance on spinning, zipping, and checking labels before tumble drying.
Tips on sorting laundry by fabric type and colour before drying.
Initial steps before the first use, including cleaning the drum.
Step-by-step guide for running a standard drying cycle.
Advice on achieving the best drying results and avoiding issues.
How to stop or cancel a running drying cycle.
Instructions on how to safely remove dried laundry from the dryer.
How to properly turn off and unplug the appliance.
How to activate and deactivate the child lock feature to prevent accidental operation.
Methods for cleaning the interior drum, including removing rust.
How to clean the outside surfaces of the tumble dryer.
Instructions for cleaning the door seal and glass window after each use.
Step-by-step guide for removing and cleaning the lint filter.
Procedures for cleaning and maintaining the dryer's vent hose.
To Next Page
General
