What to do if my Logik Dryer has overheated?
If your Logik Dryer has overheated, immediately press the Power button to switch it off and pull out the mains plug. The overheating may be due to a circuitry fault (NTC or PCB). After these steps, call a qualified service agent for assistance.
What to do if I see an internal thermostat error on my Logik LVD6W13 Dryer?
If you see an internal thermostat error on your Logik Dryer, press the Power button to switch off the dryer and pull out the mains plug. This error indicates that the thermostat elements are faulty. After these steps, call a qualified service agent for assistance.
General| Dryer type | Vented |
|---|---|
| Drying capacity | 6 kg |
| Energy efficiency class | C |
| Sensor drying | No |
| Energy Rating | C |
| Colour | White |
Steps to clean the lint filter, including opening, removing, cleaning, and replacing it.
Instructions for cleaning the vent hose by airing or rinsing and drying thoroughly.
Read and follow installation instructions carefully, noting power supply regulations and lifting cautions.
Select a flat, stable surface, avoid direct sunlight or freezing temperatures, and ensure adequate space.
Guidance on moving the dryer and connecting the vent hose, including diagrams for assembly.
Adjust the four levelling feet to ensure the dryer is stable and level.
Safety advice on mains connection, avoiding adapters/extension cables, and checking the cable/plug.
Identification of the main parts of the tumble dryer, including the window and control panel.
Detailed explanation of each button (Anti-Crease, Start/Pause, Dryness Level, Programme, Power) and indicator light.
Spin laundry thoroughly, fasten zips/buttons, and check care labels for tumble dry suitability.
Sort laundry by fabric type and colour to ensure optimal drying results.
Details on clothing types, programmes, dryness levels, load capacity, and drying times.
Instructions for drying very small loads using the '1 Hour Dry' programme.
Initial cleaning of the drum and steps for operating a standard drying cycle.
Advice on avoiding over-drying, drying specific materials, and checking care labels.
Steps to cancel a running drying programme by using the Start/Pause and Power buttons.
Instructions for safely removing laundry after the drying cycle is complete.
Procedure for turning off the dryer using the Power button.
How to activate and deactivate the Child Lock function using the Dryness Level and Programme buttons.
Instructions for cleaning the drum, exterior surfaces, door seal, and window to maintain performance.
Detailed steps for cleaning the lint filter, including washing and drying.
Procedure for cleaning the vent hose, including airing, rinsing, and thorough drying.
Solutions for common issues like dryer not starting, overheating, or clothes not drying properly.
To Next Page
