11
Installing the Vent Hose
• Connect one end of the Vent Hose with an adaptor. Then fix it to the back vent of the unit
and turn it into the vent until screwed securely.
• Connect the other end of the Vent Hose with the other adaptor. Extend this end to the
outdoor. Please refer to the diagrams below for correct assembly.
Moving the Dryer from One Location to Another
Before you move the dryer:
• Turn off the power source, and disconnect the mains cable.
• Shrink the Vent Hose to keep it out of the way.
Moving and Installing
Two or more people are required to carry the
dryer and for any installation work.
Vent Hose
~36cm
Adapter A
Dryer
Vent Hose Adapter B
Vent Hose (Extended)
~150cm
To Next Page
Loading...
Need help?
General
