21
Drying cycle is
unusually long.
• Lint filter / Vent Hose is
clogged.
• Laundry load exceeds
drying capability of selected
programme.
• Laundry insufficiently spun
before using dryer.
• Clean the lint filter / Vent Hose before
and after each use of the dryer.
• Select a more suitable drying
programme, or remove some laundry.
• Spin laundry in washing machine
thoroughly before using dryer.
Piles on clothes after
drying.
• Some synthetic fabrics or
crease-proof clothing will
result in piling after rubbing
against each other during
the drying cycle.
• Turn the clothes inside out.
• Use a fabric softener during washing.
Unusual knocking
noises from inside
dryer.
• Heavy wet clothes are
turning, or clothes have
zips, buttons, or other
adornments that are
knocking on the drum
interior.
• This is normal and NOT a fault.
Unusual knocking noise
from Vent Hose.
• The dryer forces damp air
out through the Vent Hose
at some force. This causes
the Vent Hose to knock
against surfaces.
• This is normal and NOT a fault.
Troubleshooting
Error Code
When an error occurs, the LED will display an Error Code and the machine will beep. If the fault
cannot be resolved, repair is needed.
1. Press the Power button to switch off the dryer.
2. Pull out the mains plug.
3. Call a qualified service agent for assistance.
Error
Code
LED Indication Description Probable Cause
E1
Light indicator blinks twice
a second.
Dryer has
overheated.
Circuitry fault (NTC or PCB).
E3
Standard and Light
indicators blink twice per
second. Blinks slowly.
Internal
thermostat error.
Thermostat elements are faulty.
E4
Extra Dry Indicator blinks
rapidly.
Internal
thermostat error.
Thermostat is faulty.
To Next Page
Loading...
Need help?
General
