EasyManuals Logo

Logik MP3-128 LCD User Manual

Logik MP3-128 LCD
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Advanced Settings
To navigate the settings menu.
1. Press & hold the A-
B/Menu button and release it
to enter the settings menu.
2. Press the Skip buttons to choose a setting.
3. Press the A-B/Menu button to select that setting.
4. After setting is finished, press & hold the A-
B/Menu button and release it to exit the Menu.
Equalizer Setting
The Equalizer (Eq) setting is to adjust the music playback effect. There are six Eq presets available:
Normal, X-Bass, Rock, Jazz, Classical and Pop.
1. Select Equalizer in the settings menu.
2. Press the Skip buttons to select a preset Eq.
3. Press the A-B/Menu button to activate.
Play mode Setting
The available Play modes are:
Normal
Repeat Track
Repeat All
Shuffle
Shuffle Repeat
1. In the settings menu, select Play Mode.
2. Press the Skip buttons to select a play mode.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik MP3-128 LCD and is the answer not in the manual?

Logik MP3-128 LCD Specifications

System Memory IconSystem Memory
internal memory128MB, 256 MB, 512 MB or 1 GB
Power IconPower
battery type1 x AAA Battery
battery continuous playing timeUp to 8 hours
Display IconDisplay
display resolution128 x 32 dots
display typeDot-matrix LCD with backlight
Processor IconProcessor
processor speed75 MIPS DSP
Audio IconAudio
signal to noise ratio> 90 dB
frequency response20 Hz ~ 20 kHz
output power< 11 mW (each output)