Upgrade the Firmware
The firmware in the player can be updated through the Firmware Download utility running on your
PC. To update the firmware, run the Firmware Download utility. The MP3 Player driver must be
installed to use the Software Utility.
1. Plug the MP3 Player into the USB port of your computer. The built-in LCD will display
"READY", indicating that the MP3 Player is in USB mode.
2. To run the Player Update utility go to: Start > Programs > SigmaTel MSCN Audio Player >
Firmware Download.
3. Check the Current Firmware Version and Upgrade Firmware Version. If you are sure it is
the correct version to update, click on the Start button.
4. The firmware will be transferred to the player. Please wait until it has finished.
5. Click on the Close button to exit.
Format Data Area option: When not selected (default): Updates the firmware only. If
selected( recommended): Updates the firmware and formats the storage space.
To Format the MP3 Player
1. Connect the MP3 Player to the computer.
2. Format the MP3 Player (removable disk) using the Windows format tool.
Note: Do not select NTFS from the File System menu. Otherwise, the MP3 Player can not
work and you will need to format it again.
Removing the MP3 Player from your computer
Windows Me, 2000 & XP user:
1. Click on the Safely Remove Hardware icon in the taskbar (next to the clock).
2. Click on Safely remove USB Mass Storage Device.
3. Wait until a Safe to Remove Hardware message is displayed.
4. Remove the MP3 Player.
Windows 98/98SE user:
1. Please wait until the player LCD displays "IDLE" for a moment.
2. Remove the MP3 Player.
To Next Page
Loading...