16 ENGLISH
G1 and G3 buttons are pre-programmed
by default to cycle through lighting and
equalizer proles.
When the headset is connected to
a system with Logitech G HUB Software
running, it will cycle through all equalizer
or lighting options programmed into
Logitech G HUB Software.
When the headset is not connected
to a system with Logitech G HUB
Software running, it will cycle through
the custom lighting or equalizer proles
stored in the headset’s onboard memory.
These proles can be programmed
via Logitech G HUB Software
G3
G1
COLOR/EQUALIZER CYCLING
To Next Page
Loading...
