Logitech 890 Harmony - Adding the RF Wireless Extender to the Z-Wave Network; Installing the RF Wireless Extender; User Manual Harmony

User Manual Harmony 890
Installing the RF Wireless Extender
The extender can be wall-mounted or installed inside the cabinet where you devices are located.
Wall-Mounted
Cabinet
Adding the RF Wireless Extender to the Z-Wave Network
Anytime you update the remote, you must add the RF Wireless Extender to your Z-Wave network again.
To add the extender to your Z-Wave network:
1. Take your remote to the RF Wireless Extender you want to add. Make sure the extender is
plugged into a power outlet.
v. 1.1 page 5