40
To remove the Wireless Extender from the network, from your Harmony Remote
Software home page:
Click 1. Remote Settings.
Click 2. Manage Remotes.
Click 3. Remove beside RF Extender.
Click 4. Done.
Removing the RF Wireless Extender from your network
To assign a device to a specifi c port on the RF Wireless Extender, from your Harmony
Remote Software home page:
Click the 1. Remote Settings tab.
Click 2. Manage Remotes.
In the Manage Remotes page, click 3. Control Devices.
In the Control Devices page, at the very bottom of the page, select 4. Assign IR
Port on Wireless Extender.
Click 5. Next.
In the Assign IR Ports on Wireless Extender page, under 6. Port, select the port
you want to assign for each device.
Click 7. Next.
Click 8. Done.
On the Remote Settings page, click 9. Update Remote.
You can assign a device to a specifi c port on the RF Wireless Extender. This allows
multiple identical devices to be controlled independently from just one RF Wireless
Extender. For example, you can assign one DVD player to one port and a different DVD
player to another port.
To add additional RF Wireless Extenders, from your Harmony Remote Software home
page:
Click the 1. Remote Settings tab on your home page.
Click 2. Manage Remotes.
Click 3. Add.
Follow the online instructions.4.
Assigning a device to a specifi c port on the RF Wireless Extender
Adding additional RF Wireless Extenders
To Next Page
Loading...
Need help?
General
