5
5M
5M
5M
15M
THE BAND SAWMILL’S
SAFETY EQUIPMENT
WARNING! Risk of serious injury.
Read the warning instructions for the
sawmill in the machine's main manual,
0458-395-5300, before using the machine.
Pay particular attention to the safety distance
for persons other than the operator [Figure 1]
as the machine’s automation increases the risk
of injury.
WARNING! Never use the machine if the
safety equipment is defective..
The safety equipment must be checked and
maintained.
Here is a description of the safety features of the
Smart Set controls together with their functions.
Emergency stop on the control unit
On the control unit there is an emergency stop that
shuts off both the control panel and the engine.
Enabling switch on the control panel
The enabling switch is a lock between the
operator and the control panel. To be able
to run the software, the enabling switch button
has to be pressed down.
OPERATOR
WARNING! Wherever the machine is used,
approved personal protective equipment must
always be used.
Persons under the age of 18 may not use the
bandsaw mill or handle bandsaw blades.
Never use the machine or handle bandsaw
blades if you are tired, if you have consumed
alcohol or are taking medicine that can impair
your sight, judgment or control over your body.
WORK SITE
Always keep a hand-held, ABC type
(min. 3 kg) re extinguisher readily accessible
at the work site
Always have a fully-stocked rst aid kit
available at the workplace.
SAFETY INSTRUCTIONS
Figure 1.
To Next Page
Loading...
