Need help?Do you have a question about the Logosol F2+ and is the answer not in the manual?
General| Max log diameter | 60 cm |
|---|---|
| Chainsaw compatibility | Compatible with most chainsaw brands |
| Material | Aluminum |
| Cutting Length | 5.5 m |
| Log Diameter | Up to 60 cm |
| Power Source | Manual |
| Engine Power | Dependent on chainsaw used |
| Max Cutting Length | 3.8 meters |
Detailed steps for assembling the log lifters, including component identification.
Instructions for connecting and assembling the guide rail sections.
Detailed steps for assembling the saw carriage unit.
Procedure for attaching the chainsaw to the saw carriage.
Steps to adjust log lifter height and ensure smooth operation.
How to check and adjust the straightness of the guide rail.
Procedure for checking and aligning the guide bar fit.
Steps to adjust the saw carriage for optimal fit on the guide rail.
Detailed sequential instructions for performing sawing tasks.
Practical advice and tips for efficient and accurate sawing.
Verifying sawmill stability and adjustments for measurement accuracy.
Diagnosing issues with the chain, guide bar, or sprocket.
Understanding and mitigating problems caused by wood tension.
Guidelines for proper drying of sawn timber to prevent damage.
To Next Page
