Logosol F2+ User Manual

2
LOGOSOL continuously develops its products.
For this reason, we must reserve the right to modify
the conguration and design of our products.
Document: Logosol F2+, User Manual
Manual, ref. no: 0458-395-1221
Text: Mattias Byström, Robert Berglund, Erik Svensson
Illustrations: Martin Söderberg
Last revised: October 2020
© 2020 LOGOSOL, Härnösand Sweden
THANK YOU FOR CHOOSING A LOGOSOL MACHINE!
Read through the user manual carefully
and make sure you understand its contents
before you use the machine.
This user manual contains important safety
instructions.
WARNING! Incorrect use can result in
serious or fatal injuries to the operator or
others.
We are very pleased that you have demonstrated your condence in us by purchasing this
sawmill, and we will do our utmost to meet your expectations.
Logosol has been manufacturing sawmills since 1989. In that time we have supplied
approximately 50,000 machines to satised customers the world over.
We care about your safety as well as we want you to achieve the best possible results with your
sawmill. We therefore recommend that you take the time to carefully read this user manual from
cover to cover in peace and quiet before you begin using the saw. Remember that the machine
itself is just part of the value of the product. Much of the value is also to be found in the expertise
we pass on to you in the user manuals. It would be a pity if that were not utilised.
We hope you get a lot of satisfaction from the use of your new machine.
Bengt-Olov Byström
Founder and chairman,
Logosol in Härnösand, Sweden

Logosol F2+ Specifications

General

Max log diameter	60 cm
Chainsaw compatibility	Compatible with most chainsaw brands
Material	Aluminum
Cutting Length	5.5 m
Log Diameter	Up to 60 cm
Power Source	Manual
Engine Power	Dependent on chainsaw used
Max Cutting Length	3.8 meters