Logosol F2+ - Safety Instructions

4
• Read carefully through the entire user manual
before starting to operate the Logosol F2+.
Failure to observe these safety instructions may
result in fatal injuries.
• Make sure that everyone who uses the sawmill
is well informed of the dangers and has read
the user manual. The user manual shall always
be available to the persons working with the
sawmill. This also applies where the sawmill is
sold or loaned out.
• Read the manual and safety instructions for the
saw unit used on the sawmill.
• Minors under 18 years of age are not allowed to
operate the sawmill.
• Make sure that children and animals are not in
the vicinity when the sawmill is being operated.
• Respect the safety distances to avoid injury from
high noise levels and from chain thrown-off
in the direction of the guide bar if the chain
breaks.
• Anyone working with the sawmill must be
t for work, healthy and in good physical
condition. Make sure you take regular breaks
when operating the machine. Never operate the
machine while under the inuence of alcohol,
narcotics or other drugs or medicines that can
cause drowsiness or inattention.
• The Logosol F2+ is only to be operated where
visibility is good. It is not to be operated in the
dark or where visibility is poor.
• Make sure there are other persons within
earshot who you can summon if you need help.
• Only add extra equipment to the sawmill
that is made by Logosol or that is specically
approved by Logosol for the purpose. Other
equipment can cause accidents and should not
be used. Logosol will not accept liability for
personal injury or material damage that occurs
while using non-approved attachments on the
sawmill.
• If the saw unit used weighs more than 15 kg,
support legs must be tted under the guide rail
ends. Risk of overturning.
• Always wear protective clothing and use
personal protective equipment: Never operate
the sawmill wearing loose-tting clothes, overall
coats or similar.
• Use safety shoes with high-grip soles and steel
toecaps. Neckerchiefs, ties, jewellery or other
items that can get caught in the equipment are
not to be worn.
• Never stretch over or under the guide rail when
the sawmill is in operation. Rotating cutting
equipment. Risk of cut injuries!
• Wear strong protective gloves. Risk of cut
injuries when handling the guide bar and the
saw chain. Cutting equipment can also be hot
immediately after sawing.
SAFETY INSTRUCTIONS
Key to symbols
For your own safety, read through the entire
user manual carefully and do not start
the machine before you have understood
everything.
Use approved ear protectors and protective
eyewear. Hearing can be damaged even
after short periods of exposure.
Sharp rotating tools. Make sure that your
ngers never come near the cutting tools.
This symbol means ’WARNING’. Pay
particular attention where this symbol
appears in the manual text.
This symbol is followed by instructions that
must be observed. Pay particular attention
where this symbol appears in the manual
text.
When this symbol appears, only tighten
the bolts such that they can still move.
When there is no symbol, tighten the
bolts rmly.