Lombardini 11 LD 626-3 - Disassembly; Reassembly

- 89 -
11 LD Workshop Manual_cod. 1.5302.296_5° ed_ rev. 04
II
COMPONENTS TABLE
1 Stud bolt M8x20
2 Silicone O-ring
3 Snap pin 2x10
4 Conical screw STEI M 10x1.5
5 Self-locking flanged hex nut
6 Copper washer
7 Crinkled spring washer
8 Screw TCEI UNI 5931 M 4x35
9 Screw STEI M 8x20
10 Fuel supply pump
11 Screw TCEI M 8x18
12 Fuel supply pump seal
13 Sensor pump connection rod
14 AC pump and angular position sensor cover
15 Sensor control lever
16 Connecting pin between rod and sensor
17 Discharge stop plate
18 Angular position sensor
19 Flathead screw
Disassembly / Reassembly