Need help?Do you have a question about the Lombardini 12LD 475-2 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Number of Cylinders | 2 |
| Fuel System | Indirect injection |
| Compression Ratio | 22:1 |
| Maximum Power RPM | 3000 rpm |
| Oil Capacity | 2.5 L |
| Max Torque | 30 Nm |
| Max Torque RPM | 2200 RPM |
| Lubrication System | Forced lubrication with gear pump |
| Starting System | Electric Starter |
| Cooling System | Air |
Covers manual usage notes, warranty terms, and conditions.
Explains safety regulations, warning decals, and key glossary terms.
Guide to diagnosing issues and identifying engine model details.
Detailed technical specs, diagrams, dimensions, and performance data.
Details routine maintenance tasks, oil types, and specifications.
Guidelines for fuel quality, low-temperature fuels, and additives.
General recommendations for safe and effective engine dismantling and reassembly.
Procedures for flywheel, cylinder head, valves, and piston rings.
Details on crankshaft end play, main bearing supports, and camshaft timing.
Describes the lubrication and breather system, including oil pump and filters.
Provides curves and guidelines for checking oil pressure at different speeds.
Details the fuel circuit from the tank to the injectors.
Covers injection pump settings, timing, and injector service.
Information on alternators (12.5V/14A, 12V/18A) and starting motor.
Procedure to test the voltage regulator's proper operation.
Adjusting idling speed, full speed, and injection pump delivery.
Guidelines for protecting the engine during storage and before restarting.
Specifies sealant types and tightening torques for main components and screws.
Lists specialized tools and their part numbers for engine maintenance.
To Next Page