MAINTENANCE
8
⚫ without use of the choke.
⚫ FLYWHEEL BRAKE MODELS: Continue to hold the flywheel brake lever (located on
equipment). The engine will stop if you release the flywheel brake lever.
⚫ Position the control Level for the desired engine speed. For best engine performance, it is
recommended the engine be operated with the throttle in the FAST (or high) position.
⚫
If using air pump carburetor，because there is no
throttle rod, so press AIR PUMP one time to 3
times according to the direction of the arrow when
coldstart, then start it.
CAUTION: Carefully check if there is
enough oil before starting.
DANGER: Rapid retraction of starter cord
(kickback) will pull hand and arm toward engine
faster than you can let go.
Rotating parts can contact or entangle hands, feet,
hair, clothing, or accessories.
Running engines produce heat. Engine parts,
especially muffler, become extremely hot.
Severe thermal burns can occur on contact.
3.4 STOPPING ENGINE
1. Move the Control Level to the slow (IDLE) position.
2. Move the Control Level to the stop position.
3. FLYWHEEL BRAKE MODELS: Release the flywheel brake lever (located on equipment) to
stop the engine.
4. Turn the fuel valve to the OFF position if you do not intend to restart the engine soon.
4. MAINTENANCE
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical, and trouble-free operation. It will also help
reduce air pollution.
MAINTENANCE SAFETY
Regular maintenance will improve the performance and extend the life of the engine.
To Next Page
Loading...
