EasyManua.ls Logo

LONCIN G200F - Cylinder Head and Valves

LONCIN G200F
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G120F/G160F/G200F Part IV Disassembly and maintenance
- 44 -
4-6. Cylinder head and valves
1. Removal/installation
Stud bolt (EX)
Gasket
Stud bolt (IN)
Breather tube
Cylinder head
cover
Gasket
Crankcase body
Spark plug
Reassembly:
Clean and adjust
spark plug before
installation.
Cylinder head
Reassembly:
Before installing, remove
any carbon deposits from
the combustion chamber
and inspect valve seats.
M8×604hexagon flange bolt
Removal/installation:
·Apply oil on thread.
·Loosen and tighten the bolts in
a crisscross pattern, when
tightening, all bots should be
tightened in such way, and finally
be tightened to the specified
torque values.
Torque: 32-35N.m
6×144flange bolt
Ф10×14(2) dowel pin

Other manuals for LONCIN G200F

Related product manuals