Retrieving Data Service Records from MT4300
The MT4300 stores each transaction in its memory. The information stored includes customer name,
number of targets thrown and time and date of the transaction. The memory on the controller can ll
up so it is a good idea to use the Service Cards to periodically transfer the data o from the MT4300.
The following describes the process of retrieving the data from your MT4300.
Service Cards
Make sure that you back out to the Insert Tag screen before inserting a Service Card.
1
2
3
4
Insert a Service Card
Customers are supplied with Service Cards
in their management card binder. Place a
Service Card in the card reader to begin the
upload.
Uploading Begins
The MT4300 automatically begins transferring
the data to the Service Card. Leave the card
in the card reader as the transfer occurs. It
is possible for a service card to ll up. In that
case, the MT4300 will ask for another Service
Card.
Remove Service Card
ou may remove the Service Card from the
controller when the upload has nished.
Transfer Data to PC
The data from the MT4300 is now uploaded
to the Service Card(s) you used to upload
the data. Open up your TargetTag software
on your PC and transfer the data using
the Import Data Tab. If you need further
assistance with the transferring of data, please
refer to your TargetTag Software Manual.
38
Insert TAG
Or
Press Enter
To Pl ay
Service Records
Uploading Records
Please Wait
Service Records
Done! 42
Please Wait
To Next Page
Loading...
