Long range MT4300 - FITASC Program Menu; FITASC Program Menu Access; FITASC Program Selection

4
Select User Program
From the Program Menu, press a button 1-4
to select the User Program you would like to
create or overwrite.
*If there is already a sequence programmed,
you will be asked if you would like to overwrite
it. If no sequence has been added, you will be
taken to the Program Menu screen.
User Prog. 11
2
3
4
User Prog. 2
User Prog. 3
User Prog. 4
FITASC Program Menu
Th FITASC Program Menu and are accessed by selecting option 4 from the FITASC Menu. One of
the main di󰀨erences in the FITASC Program Menu, is that it uses trap letters instead of numbers.
se the corresponding letters to assign the traps. It is best practice to have the game menu written up
before inputing it into the Program Menu. ave this menu in front of you and program from stand 1 to
3. ach stand will allow a maximum of 7 sequences.
1
Select Option 1, Games
From the Main Menu, press button 1 to select
the Games option.
Main Menu
1
2
Games
Manual Mode
3
System Status
2
3
Select Option 3, FITASC
From the Games Menu, press button 3 to
select the FITASC option.
Select Option 4, Program Menu
From the FITASC Menu, press button 4 to
select the Program Menu option.
Game Mode
1
2
3
5 Stand
Manual Mode
FITASC
Program Menu
4
22