Long range MT4300 - Trouble Shooting; Frequently Asked Questions; Contact and Support Information

42
Trouble Shooting
Freuently Asked Questions
Contact
Please call us with any questions. our satisfaction is our priority.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subect to the following two conditions: 1 This device may not cause harmful
interference, and 2 this device must accept any interference received, including interference that may cause undesired operation.
CATION: The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such
modications could void the users authority to operate the equipment.
NOT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. owever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o󰀨 and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit di󰀨erent from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This equipment has been tested and meets applicable limits for radio frequency RF exposure. This transmitter must not be co-located or operating
in conunction with any other antenna or transmitter.
Call toll free:
1 800 987-6749, Monday-Friday 8:30am-4:30pm ST
Product Repairs
MAIL TO:
Long Range LLC.
26 Tannery St.
Franklin, N 03235
Please carefully pack and ship, prepaid and insured, to Long Range LLC.
Questions
Answers
What should I do if my MT4300 isnt working
What should I do if my MT4300 isnt turning on
First, ensure that your MT4300 is set to the
same Channel as the trap that you are trying
to re. To do this, press 3 from the Main Menu.
This will bring you to the System Status screen
and will display the current Channel. ou can
change the Channel in the System Setup
Menu 24.
Second, ensure that your MT4300 is set to the
correct Message Length. ou can change the
Message Length in the System Setup Menu
25.
Is the MT4300 waterproof
No. If used out in the elements, we suggest that
you place the MT4300 in a plastic bag free of
holes or defects to protect the device.
If the battery has been fully charged and still not
turning on, unscrew the 6 screws on the back of
the device and ensure that the ribbon cable is
securely attached.