Long range MT4300 - Program Menu; Program Menu Access; 5 Stand and Compak Program Menu

Program Menu
The Program Menu can be found in the 5 Stand, FITASC, and Compak menus and allows users to
program their own custom sequences. These user programmable menus can be overwritten. 5 Stand
and Compak share the 6 user dened menus and if a programed menu is overwritten in one mode,
it will be overwritten in the other. FITASC will save up to 4 user dened sequences. The process of
creating these dened ser Programs vary slightly and discussed here in this section.
5 Stand and Compak Program Menu
Both 5 Stand and Compak have the same Program Menu and are accessed by selecting option 4
from their respective menus. It is best practice to have the game menu written up before inputing it
into the Program Menu. ave this menu in front of you and program from stand 1 to 5. ach stand
will allow a maximum of 5 sequences.
1
Select Option 1, Games
From the Main Menu, press button 1 to select
the Games option.
Main Menu
1
2
Games
Manual Mode
3
System Status
2
3
Select Option 1 or 6, 5 Stand or Compak
From the Games Menu, press button 1 to
select the 5 Stand option, or press button 6 to
select the Compak option.
Select Option 4, Program Menu
From the chosen games menu, press button 4
to select the Program Menu option.
Game Mode
1
2
3
5 Stand
Manual Mode
FITASC
Program Menu
4
20