Need help?Do you have a question about the LONGER LK4 and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD card |
| Bed Leveling | Manual |
| Print Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 250°C |
| Machine Weight | 7.8 kg |
| Printing Speed | 80 mm/s |
| Supported Materials | PLA, ABS, TPU |
| Frame Material | Aluminum |
| Power Supply | 24V, 360W |
To Next Page
