LONGER LK 5 PRO - User Manual

Detailed specifications and parameters of the LK5 Pro 3D printer.

Lists all components and accessories included in the printer package.

Diagram showing components of the 3D printer's nozzle module.

Step-by-step instructions and diagrams for assembling the 3D printer.

Guide on how to install the LONGER 3D Slicer software on your computer.

Guide on selecting the correct printer model within the slicing software.

Overview of how to use the slicing software for preparing 3D models.

Explains slicing software parameters and their impact on print quality.

Instructions for exporting sliced models into G-code files for printing.

Explanation of the primary and secondary interfaces for controlling the printer.

Details the 'Home' screen and controls for moving the printer axes.

Controls for manual movement of the printer's X, Y, and Z axes.

Explains the 'Tune' interface for adjusting print settings like temperature and speed.

Describes the 'Utilities' menu for filament management and leveling.

Details the 'Print' interface for selecting and starting print jobs.

Steps to connect the 3D printer to a computer for online printing.

Configuration of slicing software settings for online printing.

Process of starting and managing a print job directly from the computer.

Advanced settings for fine-tuning print parameters and interface.

How the printer handles power interruptions and resumes printing.

Function and procedure for detecting and handling filament breakages.

Steps and considerations for updating the printer's firmware.

Troubleshooting steps when filament fails to feed through the nozzle.

Addresses returning filament issues and pneumatic joint jamming.

Explains behavior when printing cannot resume after a power outage.

Troubleshooting guide for inconsistent nozzle distance during leveling.

Addresses first layer curling issues and their solutions.