Need help?Do you have a question about the LONGER LK1 and is the answer not in the manual?
General| Print Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Operating Voltage | 110V/220V |
| Supported Materials | PLA, ABS, TPU |
| Connectivity | USB, SD Card |
| Display | LCD |
| Nozzle Temperature | Up to 260°C |
| Bed Temperature | Max 100℃ |
Details the technical specifications and parameters of the LK1 3D printer model.
Provides an overview and diagram of the printer's main components.
Explains the detailed structure and parts of the nozzle module.
Guides through the process of assembling the 3D printer hardware.
Details the electrical connections and wiring instructions for the printer.
Explains how to set the correct input voltage for the power supply.
Covers initial checks and basic leveling procedures before operation.
Provides detailed steps and visual guides for accurately leveling the print bed.
Instructs on loading filament and performing the initial feed into the extruder.
Outlines the primary controls and functions available for operating the printer.
Describes the layout and function of the printer's main user interface.
Guides on installing the Changlang 3D slicing software on your computer.
Explains how to select the correct printer model within the slicing software.
Introduces the basic usage and workflow of the slicing software.
Explains the meaning and impact of various slicing software parameters.
Details the process of exporting sliced models into G-code files for printing.
Explains how to connect the printer to a computer for online printing.
Covers the necessary settings within the slicing software for online printing.
Provides instructions on how to initiate and manage the printing process online.
Guides on configuring advanced or professional settings for printing.
Explains the printer's power failure detection and recovery feature.
Details the function for detecting filament breaks and resuming printing.
Provides steps for updating the printer's firmware.
Troubleshooting guide for issues where the printer fails to extrude material.
Troubleshooting steps for problems with retracting filament.
Guidance for situations where the printer cannot be powered off normally.
Addresses leveling inconsistencies and how to adjust for axis play.
Solutions for print adhesion issues like curling and detachment from the build plate.
To Next Page
