Need help?Do you have a question about the LONGER LK1 and is the answer not in the manual?
General| Print Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Operating Voltage | 110V/220V |
| Supported Materials | PLA, ABS, TPU |
| Connectivity | USB, SD Card |
| Display | LCD |
| Nozzle Temperature | Up to 260°C |
| Bed Temperature | Max 100℃ |
To Next Page
