Need help?Do you have a question about the LONGER Orange30 and is the answer not in the manual?
Guides the user through the initial steps to power on and prepare the printer.
Step-by-step guide to level the build platform for optimal printing.
Guides the user through the process of installing the slicing software.
Explains various printing parameters and their effects, like curing time and lift distance.
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Supported Materials | PLA, ABS, PETG, TPU |
| Technology | FDM |
| Heated Bed | Yes |
| Display | Touchscreen |
| Nozzle Temperature | ≤260°C |
To Next Page
