Need help?Do you have a question about the LONGER Orange10 and is the answer not in the manual?
General| Printing Speed | Up to 30 mm/h |
|---|---|
| Connectivity | USB |
| Materials | 405nm UV Resin |
| Z Resolution | 0.01 mm |
| Light Source | UV LED |
Detailed description of the 3D printer components with labels.
Lists and illustrates all items included in the printer's accessory box.
Explains the main interface with File and Setting options.
Details on listing and selecting printing job files from the TF card.
Instructions for moving the Z-axis using the touch screen interface.
Details on controlling and checking the LED status and PCB temperature.
Steps 1 and 2 for preparing the printer for leveling.
Steps 3 and 4 for leveling the build plate using paper.
Specifies the operating system and hardware requirements for the software.
Step-by-step instructions for installing the LongerWare software.
Guidance on running software as administrator and updating graphics drivers.
Comprehensive steps from opening the model to post-print cleanup.
Explains the functions of menu items like Open, Edit, Fix, Support, Slice, and Print.
Details on viewing options (Top, Bottom, Left, Right, Isometric) and Printer Setting.
Covers translating, rotating, scaling, cloning, resetting, and maximizing models.
Guide on generating, editing, and adding/deleting supports for models.
Details on setting layer thickness, advanced settings, slicing, and previewing.
Explanation of curing time, stable time, burn-in time, and lift parameters.
Instructions on saving job files and managing printing recipes.
To Next Page
