21
www.longer3d.com info@longer3d.com
frame of submenu appears red if it is selected.
Translate: select the model and translate icon, one way to
adjust the position is to click up and down arrow or input the
desired number directly, the other way is holding down the
left mouse and drag.
Rotate: select the model and rotate icon, input rotation angle
in the blank, or hold down the left mouse and drag it by 15°
intervals.
Scale: select the model and scale icon, input scaling factor or
size number in the blank. Or hold down the mouse wheel and
scroll up and down. The size of model will change along XYZ
axis by equal scale.
Clone: make a copy of the selected model.
Reset: recover to the original status.
Maximize: the model change to maximum size within building
volume.
6.8 Fix
Fix: check out the error(s) of the selected model, such as holes,
non-manifold, inverted normal, and click Fix to auto-repair the
error(s).
To Next Page
Loading...
