17
www.longer3d.com info@longer3d.com
2) Download and install the appropriate graphics driver on the
official website of Intel, the website is :
https://downloadcenter.intel.com/product/80939/Graphics
-Drivers.
Download and install third-party graphics driver detection
and installation software.
6.4 Printing Procedure
1) Open the stl model.
2) Edit the model, such as translate, rotate, scale and clone.
3) Fix the error.
4) Generate support if necessary.
5) Slice the model.
6) Generate and save the printing job file to TF card.
7) Connect to the TF card to printer.
8) Select the printing file and start to print
9) Take down the model after completed, cleanout the model.
To Next Page
Loading...
