LONGER Orange10 - Accessory Box Contents; Activating Your 3 D Printer

4
www.longer3d.com info@longer3d.com
3.2 The accessory box
TF Card1
Power Adapter1
Filtering Funnel2
Latex Gloves2
Scraper1
Photopolymer
Resin 250mL1
Card5
Release Film1
Hexagon Wrench
1.5mm
Hexagon Wrench
2mm
Hexagon Wrench
2.5mm
Tape1
Card Reader1
Clean Wiper1
4. Active Your 3D Printer
Put the printer on a flat platform. Make sure that the printer is
stable. Connect power cable and power adapter. Plug into the
electronic power and switch on the printer.