14
www.longer3d.com info@longer3d.com
5) Move up the building platform when the adjustment of
home position is finished. Then, install the resin vat, tighten
the vat fixed screw, pour into the resin. It needs to add resin
manually if the volume of model is bigger than resin left in the
vat during printing.
6 Software User Manual
6.1 PC Requirements
Windows 7/8/10, 64-bit; MAC
6.2 software installation
Double click the “AlfawiseSetup.exe”, the installation wizard
will appear as shown below, click “Next”.
To Next Page
Loading...
