26
www.longer3d.com info@longer3d.com
6.11 Generating Job File
Curing time: the exposure time to cure a layer thickness of
photopolymer resin except burn-in range. The default times
are 4000, 6000, 8000ms respectively for curing 25, 50, 100μm
layer thickness. But it needs to add the exposure time, such as
8000 to 12000ms, for the model with fine size.
Burn-in time: the exposure time for the bottom layers. The
longer the exposure time, the greater the adhesion between
①
To Next Page
Loading...
